Closed · R14SS00008 · CFDA 15.560 · Discretionary

Design Variable Development for Transverse Features in the Middle Rio

Federal grant opportunity posted by Bureau of Reclamation, cataloged on Grants.gov.

$1-$1.4M
Award range
Closed
Status
August 3, 2014
Close date
1
Expected awards

The verdict

Design Variable Development for Transverse Features in the Middle Rio is a closed discretionary listing from Bureau of Reclamation that offered $1 -- $1,445,000 across 1 expected award. Future funding cycles may be published under the same CFDA number. PlainGrants indexes 870 other opportunities from Bureau of Reclamation.

$1-$1.4M
award range
Closed
application status
1
expected award
15.560
CFDA program

Archived opportunity record

Design Variable Development for Transverse Fe… is closed (last close August 3, 2014). The parent program page for CFDA 15.560 is the reliable place to catch re-announcements. Bureau of Reclamation still indexes 870 other opportunities here.

According to Grants.gov (extract vintage 2026-08-10), this record reflects the officially published listing. See methodology.

Deadline tracker

Application window closed

Closed August 3, 2014

Posted Jul 21 Closes Aug 3

Est. Total Funding

$1,445,000

Expected Awards

1

Instrument

Cooperative Agreement

Description

Transverse features include structures like bendway weirs, spur dikes, and rock vanes. These have been used on many streams and riverways to disrupt secondary current, improve navigation, and redirect flow away from the outer bank of a bend. Bendway weirs have a flat,lower crest with the weirs pointing upstream. Vanes are also angled upstream, but have a slope on the crest that extends from bankfull to the design elevation. Spur dikes are angled downstream and are flat crested structures set at the bankfull height. Typically transverse structures use less rock than a traditional riprap revetment, while still providing a measure of engineering support to the banklines. Because transverse features are not continuous bank protection there are more uncertainties in providing adequate engineering protection at the eroding bankline. While there has been some recent documentation providing design guidelines for transverse features (Brown, 1985; Maryland Department of the Environment, 2000; Johnson et al.; 2001; Julien and Duncan, 2003; McCullah and Gray, 2005; Lagasse et al., 2009; Adolfo M. de Almeida and P. Martín -Vide, 2010;), there is considerable variation in the design criteria and very little documentation of expected results for the field practitioner, such as expected reduction in velocity or shear stress. Knowledge of how the velocity and shear stress changes occur after field implementation of a design help enhance the management of water uses, whether through increased riverside protection of critical infrastructure like irrigation drains and canals or more efficient use of available water in the river to create habitat variability without impairing effective water delivery. Over the last decade, Reclamation has worked with Colorado State University (CSU) to create a physical scale model to investigate the hydraulics around transverse features (Heintz et al., 2002; Darrow et al., 2004; Kasper et al., 2005; Kinzli et al., 2005; Schmidt et al., 2005; Kinzli and Thornton, 2010; Sclafani et al., 2012; Scurlock et al., 2012A; Scurlock et al., 2012B; Scurlock et al., 2012D; Scurlock et al., 2012E; Sin et al., 2012; Thornton et al., 2012; Ursic et al., 2012; Youngblood et al., 2012). Two different physical scale models were developed at CSU, both based on collected field data from bends on the Rio Grande between Cochiti Dam and Angostura Diversion Dam. One was an idealized trapezoid geometry and the other used natural channel geometry. The collected data set has resulted in the ability to develop empirical equations for the idealized trapezoid geometry to describe the predicted changes in velocity or shear stress given explicit changes in the assessed design variables. During the physical model testing however, significant differences were observed in the performance of the idealized trapezoid geometry and the natural channel geometry and between structure types (bendway weir, spur-dike, and rock vanes) such that there are still limitations with the developed equations. The testing done to date has allowed the identification of other tests that would improve the statistical robustness and general applicability of these equations. Objective The goal of this cooperative agreement is to develop design equations and guidelines for transverse features (bendway weirs and rock vanes) that the field practitioner is able to use with a high degree of confidence in a wide variety of hydraulic conditions. This will help enhance management of water uses, whether through increased riverside protection of critical infrastructure like irrigation drains and canals, or more efficient use of available water in the river to create habitat variability without impairing effective water delivery. The objectives for these design equations and guidelines would be as follows: 1) Easy to determine variables 2) Rapid optimization of design variables 3) Ability to apply to a wide variety of hydraulic conditions 4) Ability to apply to a wide variety of geomorphic conditions 3 Reports at each phase of this proposal would be produced to document design guidance for the optimization of transverse feature design variables. The end result of this design guidance is to allow the field practitioner to achieve a desired hydraulic and geomorphic response given existing hydraulic and geomorphic conditions.

Catch-all / unrestricted eligibility mark · R14SS00008

Grants.gov marks Design Variable Development for Transverse Fe… with a catch-all / unrestricted eligibility code (Others (see official listing text)). Read the official announcement text for the real applicant filter — the code alone is not a door list. The extract does not mark applicant cost-sharing as required. Instrument: Cooperative Agreement. Funding-activity code maps to Environment (ENV). 269 other Bureau of Reclamation listings share this eligibility-code string (31% of 871).

Code 25
Others (see official listing text)

Codes are Grants.gov eligibility category values from the extract vintage 2026-08-10. Confirm the full eligibility statement on the official listing or the Grants.gov eligibility reference.

Official Listing on Grants.gov

View full details, application forms, and submission instructions.

View on Grants.gov

Agency Contact

Timothy Wagoner Grants Officer Phone 801-524-3704

What to do next

Design Variable Development for Transverse Fe… is closed; use the parent program and agency catalog for the next funding cycle.

  • Parent CFDA 15.560 may publish future NOFOs under the same assistance listing. Open program
  • Bureau of Land Management Grants indexes 0 Grants.gov listings in this extract. Program profile
  • Bureau of Reclamation lists 870 other indexed opportunities on PlainGrants. Agency catalog

Opportunity deadlines and eligibility change on Grants.gov; PlainGrants mirrors the extract and is not the submission system.

Disclaimer: This information is sourced from Grants.gov and SAM.gov and is for informational purposes only. Opportunity details, deadlines, and eligibility requirements change frequently. Always verify current information directly on Grants.gov before applying. PlainGrants is not affiliated with any federal agency.

Data sourced from the SAM.gov Assistance Listings and Grants.gov. See our methodology for details. Retrieved and formatted by PlainGrants